About usBusiness field
Twin Screw Extruder
Compounding
System
- 1 Twin Screw Extruder Strand Cutting System
-
It is the most commonly used system. The polymer
compounded in the extruder passes through the
Breaker Plate of the die head at the end of the
barrel. The polymer is discharged through a die
nozzle into multiple strands by extrusion.
- 2 Twin Screw Extruder
Under Water Cutting System(uwc) -
It is one of die face cutting system.
The polymer compounded with the extruder
is discharged from the nozzle on a circular die
at the end of the barrel. The polymer is cut
into pellets by rotating knives and cooled in
water, and transferred to the centrifugal dryer.
- 3 Twin Screw Extruder
Water-Ring Cutting System -
It is one of die face cutting system.
The polymer compounded in the extruder is
discharged through a circular die nozzle at the
head of the barrel, cut into pellets, mixed up with
water which is rotating outside of the die, and
be cooled down and transferred in a slurry form.
- 4 Twin Screw Lab-Extruder
-
Today’s extrusion industry requires intensive
R&D activities as new materials are devel-
oped and launched almost every day. This
laboratory extruder is a small model of the
TEK series and this will surely meet your
R&D’s requirement.
It is good for small quantity batch production
- 5 Turnkey System for the
Compounding -
Through the basic needs of the customer
(End-product type and production capacity),
we can deliver not only the extruder but
also auxiliary parts, Engineering, design and
manufacturing, installation, start up and
consulting with training after review the
technical possibilities.